DNG-100 Low Fog Generator


The DNG-100 converts normal fog from fog machine into a floor-hugging cloud which is almost virtually similar to the dry ice effect. This is achieved by cooling the temperature of the fog to the point where it falls to the ground.

The DNG-100 is easy to operate as there are no external controls on the machine. Simply plug the unit in and place the fog conducting hose from the output of any fog machine to the input of the DNG-100.

The unit is fully operational upon being plugged in. Note that the volume of fog produced is controlled by the fog machine that the DNG-100 is attached to.

*For best low fog effect, use Antari FLR or FLC Fog Fluid.


Input voltage US model : AC 100-120V, 50/60Hz
EU model : AC 220-240V, 50/60Hz
Refrigerant 120V R- 404A , 1.39LB (0.63 Kg)
240V R- 404A , 1.39LB (0.63 Kg)
Start current 120V / 61A
240V / 21A
Rated Current 120V / 6.7A
240V / 3.2 A
Rated power 120V 750W
240V 600W
Ambient temp.range 5°C – 40°C (41°F – 104°F)
Control On/Off switch control
Optional Accessories  FTA-1
Dimension L 784 W 608 H 479 mm
(L30.86 W 23.93 H 18.85 inch)
Weight 72 kg (158.73 lbs)



Two implementations of the DNG-100