W-510 Wireless Control Fog Machine


The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.

‧Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as a standard controller. The working distance of wireless control is 50 meters in open area.

‧Opto-electronic Fluid Sensor
 When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect the pump from burning.

‧More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles. This leads to a fairly low fog fluid consumption. Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.

‧New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between – 20 and + 60 degree Celsius.


Input voltageUS model : AC 100-120V, 50/60HZ 8.5A
EU model : AC 220-240V, 50/60Hz 4.5A
Rated power120V 1000W
240V 1070 W
Warm-up time13 minutes (approx.)
Fluid consumption90 ml/min
Fluid tank capacity2.8 Liters (0.74 gallon)
Compatible fluidAntari FLG Heavy Fog Fluid
Antari FLR Light Fog Fluid
Operating time30 mins at max. output
Ambient temp.range0°C – 40°C (32°F – 104°F)
ControlDMX 512, Wireless
DMX channels1 channel
IEC (Power)
XLR 3-pin and 5-pin (DMX)
Optional AccessoriesW-510-HB Hanging Bracket
DimensionL 487 W 250 H 223 mm
(L 19.17 W 9.84 H 8.78 inch)
Weight11.4 kg (25.13 lbs)



  W-1 Wireless Remote



FLG Heavy Fog Fluid

FLR Light Fog Fluid